RGPV CBGS 3rd Year 5th Sem Practical List and Syllabus
Hello friends; In this article we are going to share RGPV new schemes i.e. CBGS 5th sem practical list of all branches like CSE, ME, CM, CE, EC, EX, IT, Fire tesch, Mining, etc. Here you get list of all practical of specific branch and if you want to download pdf file of all practicals than go to below the post.
RAJIV
GANDHI PROUDYOGIKI VISHWAVIDYALAYA, BHOPAL
Credit
Based Grading System
CS-5002
(Operating System)
Computer Science and Engineering V-Semester
List of Experiment
1. Write a
program to implement FCFS CPU scheduling algorithm.
2. Write a
program to implement SJF CPU scheduling algorithm.
3. Write a
program to implement Priority CPU Scheduling algorithm.
4. Write a
program to implement Round Robin CPU scheduling algorithm.
5. Write a
program to compare various CPU Scheduling Algorithms over different Scheduling
Criteria.
6. Write a
program to implement classical inter process communication problem(producer
consumer).
7. Write a
program to implement classical inter process communication problem(Reader
Writers).
8. Write a
program to implement classical inter process communication
problem(Dining_Philosophers).
9. Write a
program to implement & Compare various page replacement algorithm.
10. Write a
program to implement & Compare various Disk & Drum scheduling
Algorithms
11. Write a
program to implement Banker’s algorithms.
12. Write a
program to implement Remote Proccedure Call(RPC).
13. Write a
Devices Drivers for any Device or pheriperal.
Computer Science and Engineering V-Semester
CS-5003 (Database Management System)
Suggested list of experiments: -
Lab Assignments:
1. Delete
duplicate row from the table.
2. Display
the alternate row from table.
3. Delete
alternate row from table.
4. Update
multiple rows in using single update statement.
5. Find the
third highest paid and third lowest paid salary.
6. Display
the 3rd, 4th, 9th rows from table.
7. Display
the ename, which is start with j, k, l or m.
8. Show all
employees who were hired the first half of the month.
9. Display
the three record in the first row and two records in the second row and one
record in the third row in a single sql statements.
10. Write a sql
statements for rollback commit and save points.
11. Write a pl/sql
for select, insert, update and delete statements.
12. Write a
pl/sql block to delete a record. If delete operation is successful return 1
else return 0.
13. Display
name, hire date of all employees using cursors.
14. Display
details of first 5 highly paid employees using cursors.
15. Write a
database trigger which fires if you try to insert, update, or delete after 7’o’
clock.
16. Write a
data base trigger, which acts just like primary key and does not allow
duplicate values.
17. Create a
data base trigger, which performs the action of the on delete cascade.
18. Write a
data base trigger, which should not delete from emp table if the day is Sunday.
19. In this
subject the students are supposed to prepare a small database application in
complete semester like financial accounting system, Railway reservation system,
institute timetable management system. Student record system, library
management system, hospital management system etc. in RDBMS as follows:
Section A: Solving the case studies using ER datamodel
(design of the database) Section B: Implement a miniproject for the problem
taken in section A.
Computer Science and Engineering V-Semester
CS-5006 (Computer Programming V (Unix/Linux-Lab.))
List of Experiments:-
1. To Study
basic & User status Unix/Linux Commands.
2. Study
& use of commands for performing arithmetic operations with Unix/Linux.
3. Create a
file called wlcc.txt with some lines and display how many lines, words and
characters are present in that file.
4. Append ten
more simple lines to the wlcc.txt file created above and split the appended
file into 3 parts. What will be the names of these split files? Display the
contents of each of these files. How many lines will be there on the last file?
5. Given two
files each of which contains names of students. Create a program to display
only those names that are found on both the files.
6. Create a
program to find out the inode number of any desired file.
7. Study
& use of the Command for changing file permissions.
8. Write a
pipeline of commands, which displays on the monitor as well as saves the
information about the number of users using the system at present on a file
called usere.ux.
9. Execute
shell commands through vi editor.
10. Installation,
Configuration & Customizations of Unix/Linux.
11. Write a
shell script that accepts any number of arguments and prints them in the
reverse order.
12. Write a
shell script to find the smallest of three numbers that are read from the
keyboard.
13. Write a
shell script that reports the logging in of a specified user within one minute
after he/she logs in. The script automatically terminates if the specified user
does not login during a specified period of time.
14. Installation
of SAMBA, APACHE, TOMCAT.
15. Implementation
of DNS, LDAP services,
16. Study &
installation of Firewall & Proxy server.
RAJIV
GANDHI PROUDYOGIKI VISHWAVIDYALAYA BHOPAL
Credit
Based Grading System
AU-
5002 Measurement & Control
Automobile Engg, V-Semester
List of
Experiment (Expandable) ( Measurement & control):
1-
Study of various temperature measuring
devices; thermo couple, RTD, gas thermo meters.
2-
Measuring velocity of fluid flow by Ventura
meter/ orifice meter/ pitot-tube.
3-
Measuring torque and power generated by a prime mover by using pony brake
dynamometer.
4- Study
of various pressure measuring devices like manometers, mercury in glass
pressure gauge.
5- To
develop a measuring device for fluid level measurement.
Automobile
Engg, V-Semester
AU- 5003
Automotive Transmission System
List of
Experiments (Pl. expand it):
1. Study of transmission of front and rear
engine vehicles
2. Study of front and rear-wheel-drive
vehicle
3. Study of four wheel-drive vehicles
4. Study of various gear boxes and
presynchronization systems
5. Study of fluid couplings, hydrodynamic
drives and torque converters
6. Automatic transmission system study
7. Electric drive vehicle study
Automobile Engg,
V-Semester
AU- 5004 Automotive
Chassis system
List of
Experiments (Pl. expand it):
1 Study of
types of chassis layouts.
2. Study and Construction of front axle
3. Study and Construction of steering
linkages.
4. Study and Construction of rigid axle
suspension system.
5. Study and Construction of independent
suspension system.
6. Study and Construction of disc &
drum brake assemblies..
RAJIV
GADHI PROUDYOGIKI VISHWAVIDYALAYA, BHOPAL
Credit
Based Grading System
Biomedical
Engineering, V-Semester
BM-5002
Analog & Digital Communication
Analog
& Digital Communication
Suggested
List of Experiments
1. Study of amplitude modulation and
determination of modulation index. Design AM generator and its implementation
2. Design of AM detector and its
implementation
3. Study of FM
4. Design of FM generator and its
implementation
5. Study of waveform synthesizer
6. Verification of sampling theorem
7. Time division multiplexing
8. Study of PCM system-
9. Study of DM system
10. Study of ASK system
11. Study of BPSK system
12. Study of DPSK system
13. Study of BFSK system
RAJIV GANDHI
PROUDYOGIKI VISHWAVIDYALAYA, BHOPAL
Credit Based
Grading System
Biomedical
Engineering, V-Semester
BM-5004 Biomedical
Equipments
List of Experiments:-
1. To
measure blood pressure by sphygmomanometer.
2. Record
ECG of patient using limb leads.
3. Record
ECG of patient using chest leads.
4. To
find blood oxygen saturation level using finger plethysmograph.
5. Study
of PCG.
6. To
measure various respiratory capacity & volume using Spiro meter.
7. Study
of EEG.
8. To
find EPR or ERP using EEG.
9. Study
of blood flow meter.
10. to
measure nerve conduction velocity.
RAJIV
GANDHI PROUDYOGIKI VISHWAVIDYALAYA BHOPAL
Credit
Based Grading System
Biomedical
Engineering, V-Semester
BM- 5006
Lab View Programming
Introduction
to LabView Programming, Program writing concepts, its applications, and various
programming examples.
Chemical Engineering, V-Semester
Rajiv Gandhi Proudyogiki Vishwavidyalaya, Bhopal
Credit Based Grading System
CM-5002 Computational Methods in Chemical Engineering
List
of Experiment (Pl. expands it):
1. Data representation and treatment by
Graphical methods, Pressure- Volume-Temperature and concentration relationships
for gases and their mixtures.
2. Integrated methods of data processing.
Integral functions and their graphical representation.
3. Estimation of properties from empirical
correlations (Nokay)
4. Estimation of critical properties from
group contribution method.
5. Redlich-Kwong equation of state and
other Virial equations to estimate thermodynamic properties like
compressibility factor, molar volume and P-V-T relationships.
6. To study the effect of liquid viscosity
and dissolved gases on pump efficiency, reciprocating pump performance.
7. Measurement errors their propagation
and minimization of random errors. Selection of confidence limits.
8. Mass balance problems using continuity
equation applied to a dynamic system. Formation of differential equations
(component balance) and their solution & examples – CSTR and flow through
pipes.
9. Numerical Solutions of batch reactor
problems. Euler Algorithm
10. Runge-Kutta algorithm and its application
in chemical Engineering. Implicit and explicit calculations. Problems related
to effect design, optimum liquid concentration.
11. Transient flow of fluid unsteady
temperature and varying concentration problems and use of partial differential
equation to solve them.
Note:
Each student should perform at least eight experiments from the above list.
RGPV CBGS 5th Sem Practical
RAJIV
GANDHI PROUDYOGIKI VISHWAVIDYALAYA, BHOPAL
Credit
Based Grading System
Chemical
Engineering, V-Semester
CM-5003 Mass
Transfer-I
List
of Experiment (Pl. expand it):
1. To determine to diffusion coefficient
of liquid vapour in air by Stefan’s tube.
2. To determine diffusion coefficient, or
diffusivity, of given liquid in air.
3. To determine Mass Transfer Co-Efficient
in gas liquid system by evaporation
4. To study the rates and phenomena of
diffusion into gases flowing through the pipe.
5. To study different types of plates and
packing.
6. To prepare the vapor-liquid equilibrium
and Boiling point diagram for a binary liquid mixture.
7. Determination of relative volatility of
a given system of acetic acid and water.
8. To verify Rayleigh equation for
differential distillation of binary system.
9. To carry out the steam distillation.
10. Studies on packed tower distillation
unit.
11. Studies on the sieve plate distillation
unit.
12. Studies on bubble cap distillation
column.
13. To study the absorption of a gas in a
packed column and calculation of NTU and HTU.
Note:
Each student should perform at least eight experiments out of the above list.
RAJIV GANDHI
PROUDYOGIKI VISHWAVIDYALAYA, BHOPAL
Credit Based
Grading System
Chemical Engineering,
V-Semester
CM-5004 Heat
Transfer
List
of Experiment (Pl. expand it):
1. To determine the thermal conductivity
of metal rod.
2. To determine the equivalent thermal
conductivity of composite wall.
3. To determine heat transfer coefficient
in force convection.
4. To determine heat transfer coefficient
in Natural convection.
5. To determine heat transfer coefficient
with the help of Stefan Boltzmann Apparatus.
6. To calculate emissivity of the test
plate by emissivity measurement apparatus.
7. To determine heat transfer coefficient
in double pipe heat exchanger.
8. To study the heat transfer
characteristics of a shell and tube heat exchanger (heating/cooling) of water.
9. To determine heat transfer coefficient
in parallel and counter flow heat exchanger.
10. To measure the rate of evaporation using
an open pan evaporator.
11. To measure the rate of condensation of
pure water vapour and to determine the heat transfer coefficient.
12. Demonstrate the film-wise drop-wise
condensation and determination of the heat transfer coefficient.
13. To study the single effect evaporator and
find out the heat transfer coefficient.
RAJIV GANDHI
PROUDYOGIKI VISHWAVIDYALAYA, BHOPAL
Credit Based
Grading System
Chemical
Engineering, V-Semester
CM-5006 Chemical
Process Plant Simulation Lab – I
Simulation
Study of Various Chemical Process with the help of following
Softwares
:
MATLAB
, AFT Fathom, ChemCAD, Pro Simulator .
Electronics & Communication Engineering, V-Semester
Rajiv Gandhi Proudyogiki Vishwavidyalaya Bhopal
Credit Based Grading System
EC- 5002 Digital Communication
List of Experiments:
1. Study of
Sampling Process and Signal Reconstruction and Aliasing.
2. Study of PAM,
PPM and PDM.
3. Study of PCM
Transmitter and Receiver.
4. Time Division
Multiplexing (TDM) and Demultiplexing.
5. Study of ASK,
PSK and FSK Transmitter and Receiver.
Electronics & Communication Engineering,
V-Semester
EC- 5003 Microprocessor and Microcontroller
List of Experiments:
1. Assembly
Language Programs of Microprocessor 8086.
2. Assembly
Language Programs of Microcontroller 8051.
3. Assembly
Language Programs for Interfacing Chips.
RAJIV GANDHI PROUDYOGIKI VISHWAVIDYALAYA
BHOPAL
Credit Based Grading System
Electronics & Communication Engineering,
V-Semester
EC- 5004 Communication Networks and
Transmission Lines
List of Experiments:
1. To set up the
standing waves formation on a transmission line and observe their maxima and
minima using frequency domain method.
2. To measure the
characteristic impedance of transmission lines using frequency domain method
and to differentiate between the matched and unmatched lines.
3. To measure the
VSWR, reflection coefficient and return loss in a transmission line.
4. To measure the
dielectric constant of insulator in the transmission line.
5. To measure the
velocity of propagation and wavelength in the given transmission line.
6. To study the
attenuation characteristics of signal along a transmission line and observe its
variation with frequency. Also calculate the phase constant and propagation
constant.
7. To study the
effect of reactive loads on transmission lines.
8. To study the
difference between lossy and loss less line.
9. To study the
physical dimensions of transmission line and estimation of characteristic
impedance.
10. To study
behavior of infinite and short lines.
11. To study
the operation of Balun transformer.
12. To study
the loading of transmission lines and estimate the cut off frequency of a
loaded line.
13. To study
the use of coaxial lines as tuned circuits and delay lines.
14. To study
the input and output impedance of any RF circuits and match it to 50/75 ohms.
15. Simulation
of various filters
Electrical Engineering, V-Semester
RAJIV GANDHI PROUDYOGIKI VISHWAVIDYALAYA, BHOPAL
Credit Based Grading System
EE-5002 Electrical Machine –II
Electrical
Machine-II EXPERIMENTS
1. Determination of complete torque speed
characteristics of a three phase induction machine in braking, motoring and
generating regions and it’s calibration
2. Study of effect of rotor resistance on
the load characteristics of a wound - rotor induction motor.
3. (a) Determination of equivalent circuit
parameters, prediction of performance. Verification from
actual
load test. (b) Separation of losses of Induction motors and estimation of
efficiency.
4. Speed control of Induction motor -
Conventional, electronic. Solid state speed control using (i) V constant, (ii)
V/f constant, (iii) slip - energy injection
5. Determination of equivalent circuit
parameters of a single phase Induction motor. Prediction torque -speed
characteristics. Verification from load test
6 Study of torque step rate characteristic of a
stepper motor. Determination of operating range.
7. Load characteristic of universal motor,
operating on dc and ac supply. Comparison of performance.
8. Load characteristic of shaded
pole-motor.
9. Characteristic of switched reluctance
motor.
10. Circle diagram of 3 phase Induction Motor.
11. Performance of 3 Ph. Induction Motor with
single phasing and comparison.
Electrical
Engineering, V-Semester
EE-5003
Switchgear and Protection
List of
Experiments:
1. Determination of drop out factor of an
instantaneous over current relay.
2. Determination of operating
characteristic of IDMT relay.
3. Determination of operating
characteristic of differential relay.
4. Study and operation of gas actuated
protective relay.
5. Study and operation of static over
current relay.
6. Determination of transmission line
parameters using MATLAB.
7. Analysis of power system faults
(Symmetrical & Asymmetrical) using MATLAB.
8. Study of SF6 circuit breaker
9. Protectional simulation study of
generator, Transformer, Feeder & Motor protection.
RAJIV
GANDHI PROUDYOGIKI VISHWAVIDYALAYA, BHOPAL
Credit
Based Grading System
Electrical
Engineering, V-Semester
EE-5004
Electronic Instrumentation
List of
Experiments:-
1. Measurement of inductance of a coil
using Anderson Bridge.
2. Measurement of capacitance of a
capacitor using schering bridge.
3. LVDT and capacitance transducers
characteristics and calibration.
4. Resistance strain gauge- Strain
Measurement and calibration.
5. Measurement of R,L,C & Q using LCR-Q
meter.
6. Study & measurement of frequency
using Lissajous patterns.
7. Measurement of pressure using pressure
sensor.
8. Study of Piezo-electric Transducer and
Measurement of impact using Piezo-electric Transducer
9. Measurement of Displacement using LVDT.
10. Measurement of speed of a Motor using
photoelectric transducer.
11. Study & Measurement using ph meter.
12. Temperature measurement & Control
using thermo couple & using thermistor.
Electrical & Electronics Engineering, V-Semester
RAJIV GANDHI PROUDYOGIKI VISHWAVIDYALAYA, BHOPAL
Credit Based Grading System
EX-5002 Electrical Machine –II
Electrical Machine-II EXPERIMENTS
1. Determination
of complete torque speed characteristics of a three phase induction machine in
braking, motoring and generating regions and it’s calibration
2. Study
of effect of rotor resistance on the load characteristics of a wound - rotor
induction motor.
3. (a)
Determination of equivalent circuit parameters, prediction of performance.
Verification from
actual load test. (b) Separation of losses of
Induction motors and estimation of efficiency.
4. Speed
control of Induction motor - Conventional, electronic. Solid state speed
control using (i) V constant, (ii) V/f constant, (iii) slip - energy injection
5. Determination
of equivalent circuit parameters of a single phase Induction motor. Prediction
torque -speed characteristics. Verification from load test
6 Study
of torque step rate characteristic of a stepper motor. Determination of
operating range.
7. Load
characteristic of universal motor, operating on dc and ac supply. Comparison of
performance.
8. Load
characteristic of shaded pole-motor.
9. Characteristic
of switched reluctance motor.
10. Circle
diagram of 3 phase Induction Motor.
11. Performance
of 3 Ph. Induction Motor with single phasing and comparison.
Electrical & Electronics Engineering,
V-Semester
EX-5003 Switchgear and Protection
List
of Experiments:
1. Determination of drop out factor of an
instantaneous over current relay.
2. Determination of operating
characteristic of IDMT relay.
3. Determination of operating
characteristic of differential relay.
4. Study and operation of gas actuated
protective relay.
5. Study and operation of static over
current relay.
6. Determination of transmission line
parameters using MATLAB.
7. Analysis of power system faults
(Symmetrical & Asymmetrical) using MATLAB.
8. Study of SF6 circuit breaker
9. Protectional simulation study of
generator, Transformer, Feeder & Motor protection.
Electrical & Electronics Engineering,
V-Semester
EX-5004 Power Electronic Devices and Circuits
List Of Experiments
1 Vi Characteristics Of Scr
2- Vi Characteristics Of Diac
3- Vi Characteristics Of Bjt
4- Characteristics
Of Triac
5- Vi
Characteristics Of Mosfet
6- Transfer Characteristics Of Mosfet
7- Output Characteristics Of Igbt
8- Transfer
Characteristics Of Igbt
9 - Single Phase
Scr Half Controlled Converter With R Load
10- 1φ Scr Fully
Controlled Converter With R-Load
11 - Study Of 3φ Scr Half Controlled Converter
12- Study Of 3φ Scr Fully Controlled Converter
13- Study Of
Classes Of Commutation A,B,C,D,E,F.
Fire Technology & Safety Engineering, V-Semester
RAJIV
GANDHI PROUDYOGIKI VISHWAVIDYALAYA BHOPAL
Credit
Based Grading System
FT-5002
PARAMEDICS
LABORATORY
1. To
measure the bleeding time and clotting time of healthy adult person using
vrigid splints.
2. To
calculate the victim dressing time using various type of bandage by first aid
responder.
3. To
calculate the body mass index of an adult person by using surgical height
measuring scale with digital weighting machine.
4. To
calculate the blood pressure of an adults person using mercury sphygmomanometer
and stethoscope apparatus.
5. To
calculate the scale of burn.
6. To
perform and practice the different methods of handling and transportation of
Victim.
7. To
perform and practice the first aid treatment of Fractures in different part of
human body.
8. To
measure the working efficiency of human lungs with lung testing apparatus.
RAJIV
GANDHI PROUDYOGIKI VISHWAVIDYALAYA BHOPAL
Credit
Based Grading System
Fire
Technology & Safety Engineering, V-Semester
FT-5003
FIRE PREVENTION & PROTECTION MEASURES
LABORATORY
1. To
measure the operating performance requirement for effective discharge time,
fire rating suitability of water type fire Extinguisher on Class A Fire.
2. To
measure the operating performance requirement for effective discharge time,
fire rating suitability of Foam type Gas Cartridge fire Extinguisher on Class B
Fire
3. To
measure the burn back resistance time for different foam concentrates using
film formation test apparatus.
4. To
assess the effective time of film formation at fire surface for different foam
concentrates using film formation test apparatus.
5. To
Perform the Caking test on given sample of Dry Chemical Powder using procedures
given in IS 4308.
6. To
determine the moisture content for regular dry chemical powder using procedures
given in IS 4308.
7. Determination
of calorific value of diesel, petrol and LPG/Kerosene.
8. To
determine the water repellency for regular dry chemical powder using water
repellency test apparatus.
RAJIV
GANDHI PROUDYOGIKI VISHWAVIDYALAYA BHOPAL
Credit
Based Grading System
Fire
Technology & Safety Engineering, V-Semester
FT-5004
COMPUTER AIDED RISK ANALYSIS
LABORATORY
1. Calculation
of individual risk and fatal accident rate as theoretical risk factor
2. Preparing
the risk matrix for an organization.
3. Application
of Hazard study methods to a raw gas holder.
4. Application
of Hazop study on an oil vaporizer.
5. Application
of Hazop study on ethylene oxide sterilizer.
6. Application
of Fault tree analysis to a chemical reactor.
7. Determination
of Safety Integrity level by using risk parameter chart for a given sample.
8. Determination
of safety integrity level by using SIL class software with risk parameter
chart.
9. Evaluation
of preliminary safety instrumented system (SIS) design using SILclass software
tool.
RAJIV
GANDHI PROUDYOGIKI VISHWAVIDYALAYA BHOPAL
Credit
Based Grading System
Fire
Technology & Safety Engineering, V-Semester
FT-5006
FIRE FIGHTING & FIELD TRAINING-II
LABORATORY
1. To
performed and practice different world of command used in appliance drill.
2. To
performed and practice hose drill in a crew.
3. To
performed and practice three men hydrant drill with hydrant post and hose pipe.
4. To
performed and practice four men hydrant drill with hydrant post and hose pipe.
5. To
performed and practice four men trailer pump drill with trailer pump, Suction
pipe, hose pipe and hose fittings.
6. To
performed and practice six men trailer pump drill with trailer pump, Suction
pipe, hose pipe and hose fittings.
7. To
performed and practice ladder drill and its application.
Information Technology, V-Semester
RAJIV GANDHI
PROUDYOGIKI VISHWAVIDYALAYA, BHOPAL
Credit Based Grading System
IT-5002 Principles of Programming Languages
List of Experiments:
4. Define a LISP function to compute sum of squares.
5. Define a LISP function to compute difference of
squares.(if x > y return x2 -y2, otherwise y2 - x2 ).
6. Define a Recursive LISP function to solve
Ackermann’s Function.
7. Define a Recursive LISP function to compute
factorial of a given number.
8.
Define a Recursive LISP function which takes one argument as a list and
returns last element of the list. (Do not use last predicate).
1. Define a Recursive LISP function which takes one
argument as a list and returns a list except last element of the list. (Do not
use but last predicate).
2. Define a Recursive LISP function which takes one
argument as a list and returns reverse of the list. (Do not use reverse
predicate).
3. Define a Recursive LISP function which takes two
arguments first, an atom, second, a list, returns a list after.
Credit Based Grading System
Information Technology, V-Semester
IT- 5003
– Computer Networks
Suggested List
of Experiment
2. Establishment and configuration of LAN.
3. Colour coding standard of CAT 5,6,7 and crimping of cable in RJ-45.
4. Study of WAN.
5. Case study of STOP AND WAIT Protocols.
6. Study of sliding window protocol.
2 Study of FDDI.
3 Study of basic networking commands like ping, ipconfig, etc
4 Case study of various Routing Strategies.
5
Case studies of various Network Topologies.
6
Establishing & studying the various parameters
of a home LAN Network.
7
Study of IOS of routers.
8
Configuring routers, bridges and switches and
gateways.
Credit Based Grading System
Information Technology,
V-Semester
IT- 5004
– Digital Communication
List of Experiments
1. Study of
PCM transmitter and receiver.
2. Study of
ASK PSK and FSK transmitter and receiver.
3. Case
Study of digital interface RS-232.
4. Case
Study of Synchronous and asynchronous transmission.
5. Case
Study of various multiplexing techniques.
6. Case
Study of Parallel and serial transmission.
7. Study of
NRZ and RZ Codes.
Mechanical Engg, V-Semester
RAJIV
GANDHI PROUDYOGIKI VISHWAVIDYALAYA BHOPAL
Credit
Based Grading System
ME- 5002 Mechanical measurement & control
List of Experiment (Expandable)(
Measurement & control):
1- Study of various
temperature measuring devices; thermo couple, RTD, gas thermo meters.
2- Measuring velocity of fluid flow by Ventura meter/
orifice meter/ pitot-tube.
3- Measuring
torque and power generated by a prime mover by using pony brake dynamometer.
4- Study of
various pressure measuring devices like manometers, mercury in glass pressure
gauge.
5- To develop a
measuring device for fluid level measurement
Mechanical Engg, V-Semester
ME- 5003 Design of Machine Elements
List of Experiment (Pl. expand it):
Designing and sketching of components
contained in the syllabus
Mechanical Engg, V-Semester
ME- 5004 Dynamics of Machines
1- Study of various models of governors.
2- Study of gyroscopic motion and calculation of value of gyroscopic
couple.
3- Study of various types of Cams and
followers and drawing the cam profile with the help of test kit.
4- Study of various first order vibration systems.
5- To study working of friction clutches using models
0 comments:
Post a Comment