Select Menu

RGPV 5th Sem Civil Engineering Syllabus | RGPV CBGS 5th Sem CE Syllabus 

Now RGPV introduced new schemes for those students who are studying in the 3rd year 5th sem of RGPV and their affiliated institutes. In this post we are going to share RGPV CBGS 5th sem syllabus for Civil engineering branch students. Please read it very carefully and also share RGPV CBGS 5th sem CE subject list . It contain 7-8 subjects with 1 elective subjects in Civil branch i.e.Structural Analysis -II; Quantity Surveying & Costing; Transportation Engineering; Construction Material & Techniques; Elective-I (Water Resources Engineering; Construction Planning and Management; Environmental Engineering; Advance Fluid Mechanics ); ; Civil Engineering Software LAB; Management Skill Development **(Internal Assessment); Innovative Thinking**(Internal Assessment) .If you want to download 5th sem CE syllabus please go below the post.




Click to 
go >>>
Download RGPV CBGS
RGPV 5rd sem syllabus <>  RGPV 6th Sem Syllabus

RGPV CBGS 5th Sem CE Subjects

List of Subjects RGPV CBGS 5th Sem Civil Engineering

S. No.
Subject Code
Subject Name

1
CE-5001
Structural Analysis -II
2
CE-5002
Quantity Surveying & Costing
3
CE-5003
Transportation Engineering

4
CE-5004
Construction Material & Techniques
5
CE-5005
Elective-I (Water Resources Engineering; Construction Planning and Management; Environmental Engineering; Advance Fluid Mechanics )
6
CE-5006
Civil Engineering Software LAB
7
CE-5007
Management Skill Development **(Internal Assessment)
8
CE-5008
Innovative Thinking**(Internal Assessment)

Download RGPV CBGS 5th Sem Civil Engg Syllabus

RAJIV GANDHI PROUDYOGIKI VISHWAVIDYALAYA, BHOPAL
Credit Based Grading System
Civil Engineering, V-Semester
CE- 5001 Transportation Engineering

Unit I

Railway: Introduction, Tractive resistances & Permanent way: Principles of Transportation, transportation by Roads, railways, Airways, Waterways, their importance and limitations, Route surveys and alignment, railway track, development and gauges, Hauling capacity and tractive effort. i) Rails: types, welding of rails, wear and tear of rails, rail creep. ii) Sleepers: types and comparison, requirement of a good sleeper, sleeper density. iii) Rail fastenings: types, Fish plates, fish bolts, spikes, bearing plates, chain keys, check and guard rails. iv) Ballast: Requirement of good ballast, various materials used as ballast, quantity of ballast, different methods of plate laying, material trains, calculation of materials required, relaying of track

Unit II

Railway: Geometric Design; Station & Yards; Points and Crossings & Signaling and interlocking: Formation, cross sections, Super elevation, Equilibrium, Cant and Cant deficiency, various curves, speed on curves. Types, locations, general equipment, layouts, marshaling yards, Definition, layout details, design of simple turnouts, Types of signals in stations and yards, principles of signaling and inter-locking.

Unit-III

Bridges: Site Investigation and Planning; Loading Standards &Component parts: Selection of site, alignment, collection of bridge design data: essential surveys, hydraulic design, scour, depth of bridge foundation, Economical span, clearance, afflux, type of road & railway bridges. : Design loads and forces, Impact factor, Indian loading standards for Railways Bridges and Highway Bridges, Bridge super structure and sub-structures, abutments, piers, wing walls, return walls, approaches, floors & flooring system, choice of super structure. Bridge Foundations, Construction, Testing and Strengthening of Bridges : Different types of foundation: piles and wells, sinking of wells, coffer-dams. Choice of bridges and choice of materials, details of construction underwater and above water, sheet piles coffer dams, Erection of bridges, girders, equipments and plants. inspection and Data collection, strengthening of bridges, Bridge failure.

Unit-IV

Tunnels: 1. Selection of route, Engineering surveys, alignment, shape and size of tunnel, bridge action, pressure relief phenomenon, Tunnel approaches, Shafts, pilot shafts 2, Construction of tunnels in soft soil, hard soil and rock, Different types of lining, methods of lining, Mucking operation, Drainage and ventilation, Examples of existing important tunnels in India and abroad.



UNIT-V

Harbours and Docks: Types of Harbours; Harbours - layouts, shipping lanes, anchoring, location identification; Littoral transport with erosion and deposition; sounding methods; Dry and Wet docks, components and operational Tidal data and analyses. Inland waterways: advantages and disadvantages; Development in India. Inland water operation.

Reference

1.Chakraborty and Das; Principles of transportation engineering; PHI 2.Rangwala SC; Railway Engineering; Charotar Publication House, Anand 3.Rangwala SC; Bridge Engineering; Charotar Publication House, Anand 4.Ponnuswamy; Bridge Engineering; TMH
5.Railway Engineering by Arora & Saxena - Dhanpat Rai & Sons 6.Railway Track by K.F. Antia
7.Principles and Practice of Bridge Engineering S.P. Bindra - Dhanpat Rai & Sons 8.Bridge Engineering - J.S. Alagia - Charotar Publication House, Anand 9.Railway, Bridges & Tunnels by Dr. S.C. Saxena
10.Harbour, Docks & Tunnel Engineering - R. Srinivasan 11.Essentials of Bridge Engg. By I.J. Victor; Relevant IS & IRS codes

Download RGPV CBGS 5th Sem Civil Engg Syllabus


RAJIV GANDHI PROUDYOGIKI VISHWAVIDYALAYA, BHOPAL
Credit Based Grading System
Civil Engineering, V-Semester
CE 5002 – Quantity surveying & Costing

Unit – I

Introduction: Purpose and importance of estimates, principles of estimating. Methods of taking out quantities of items of work. Mode of measurement, measurement sheet and abstract sheet; bill of quantities.Types of estimate, plinth area rate, cubical content rate, preliminary, original, revised and supplementary estimates for different projects.

Unit – II

Rate Analysis: Task for average artisan, various factors involved in the rate of an item, material and labour requirement for various trades; preparation for rates of important items of work. Current schedule of rates. (C.S.R.)

Unit – III

Detailed Estimates: Preparing detailed estimates of various types of buildings, R.C.C. works, earth work calculations for roads and estimating of culverts Services for building such as water supply, drainage and electrification.

Unit – IV

Cost of Works: Factors affecting cost of work, overhead charges, Contingencies and work charge establishment, various percentages for different services in building. Preparation of DPR.

Unit – V

Valuation: Purposes, depreciation, sinking fund, scrap value, year’s purchase, gross and net income, dual rate interest, methods of valuation, rent fixation of buildings.

Suggested Books:

1. Quantity Surveying & Costing – B.N. Datta 
2. Estimating & Costing for Civil Engg. – G.S. Birdi 
3. Quantity surveying & costing – Chakraborty 
4. Estimating & Costing – S.C. Rangawala 
Practical & Sessional Works: 
1. Preparation of detailed estimate. 
2. Detailed estimate for services of plumbing and water supply or Electrification work. 
3. Detailed estimate for earth work for the road construction or arched culvert. 
4. Rate analysis for at least 8 items of construction. 
5. Preparation of DPR of Civil Engineering Project. 


RAJIV GANDHI PROUDYOGIKI VISHWAVIDYALAYA, BHOPAL
Credit Based Grading System
Civil Engineering, V-Semester
CE 5003 –Structural Analysis –II

Unit. I

Moment distribution method in analysis of frames with sway, analysis of box frames, analysis of portals with inclined members, analysis of beams and frames by Kani’s method.

Unit. II

Plastic analysis of beams and frames.

Unit. III

Analysis of tall frames, wind and earthquake loads, codal provisions for lateral loads. Approximate analysis of multistory frames for vertical and lateral loads.

Unit. IV

Matrix method of structural analysis: force method and displacement method.

Unit. V

Influence lines for intermediate structures, Muller Breslau principle, Analysis of Beam-Columns.

Reference Books :-
1. Wang C.K. Intermediate structural analysis, McGraw Hill, New York. 
2. Kinney Streling J. Indeterminate structural Analysis, Addison Wesley. 
3. Reddy C.S., Basic Stgructural Analysis, Tata McGraw Hill Publishing Company, New Delhi. 
4. Norris C.H., Wilbur J.B. and Utkys. Elementary Structural Analysis, McGraw Hill International, Tokyo. 
5. Weaver W & Gere JM, Matrix Methods of Framed Structures, CBS Publishers & Distributors, Delhi 

List of experiments:
 (1) To verify the Betti’s law. 
(2) Study of a three hinged arch experimentally for a given set of loading and to compare the results with those obtained analytically. 
(3) To obtain experimentally the influence line diagram for horizontal thrust in a three hinged arch and to compare the same with the theoretical value. 
(4) To determine the flexural rigidity of a given beam. 
 (5) To study the behavior of different type of struts. 
 (6) To verify moment area theorem for slopes and deflection of a beams. 
(7) To find the deflection of a pin-connected truss and to verify the results by calculation and graphically.
 (8) To determine the carry over factors for beam with rigid connections. 
 (9) To determine the rotational stiffness of a beam when far end is (a) fixed (b) pinned. 
(10) Determine experimentally the horizontal displacement of the roller end of a two hinged arch for a given set of a loading and to compare the results with those obtained analytically. 
 (11) To obtain experimentally the influence line diagram for horizontal thrust in a two hinged arch and to compare the same with the theoretical value.


RAJIV GANDHI PROUDYOGIKI VISHWAVIDYALAYA, BHOPAL
Credit Based Grading System
Civil Engineering, V-Semester
CE- 5004 Construction Material & Techniques

A) Construction Materials: Unit-I

Stones : Occurrence, varieties, Characteristics and their testing, uses, quarring and dressing of stones. Timber : Important timbers, their engineering properties and uses, defects in timber, seasoning and treatment, need for wood substitutes, Alternate materials for shuttering doors/windows, Partitions and structural members etc. Brick and Tiles: Manufacturing, characteristics, Classification and uses, Improved brick from inferior soils, Hand molding brick table, Clay-fly ash brick table, Flooring tiles and other tiles and their characteristics.

Unit-II

Advance Construction Materials : Use of fly ash in mortars, concrete, Fly ash bricks, stabilized mud blocks, non-erodible mud plinth, D.P.C. materials, Building materials made by Industrial & agricultural waste, clay products P.V.C. materials, advance materials for flooring, doors & windows, facia material, interiors materials for plumbing, sanitation & electrification.

(B) Construction Techniques:

Unit-III

Foundation: Type of soils, bearing capacity, soil slablisation and improvement of bearing capacity, settlement and safe limits. Spread foundations, wall footings, grillage, foundations well foundation, causes of failure and remedial measures; under reamed piles, foundation on shrinkable soils, black cotton soil, timbering for trenches, dewatering of foundations. Hyperbolic parabolied footing, Brick arch foundation. Simple methods of foundation design, Damp proof courses, Repairs Techniques for foundations.

Unit-IV

Masonry and Walls : Brick masonry, Bonds, Jointing, Stone masonry, casting and laying, masonry construction, Brick cavity walls, code provisions regarding load bearing and non load bearing walls. Common defects in construction and their effect on strength and performance of walls, designed Brick masonry, precast stone masonry block, Hollow concrete block, plastering and pointing, white and color washing, distempering, dampness and its protection, Design of hollow block masonry walls. Doors, Windows and Ventilators: Types based on material etc., size location, fittings, construction sunshades, sills and jambs,
RCC doors/windows frames. Stairs types, rule of proportionality etc., Repairs techniques for masonry, walls, doors & windows.

Unit-V
Download RGPV CBGS 5th Sem Civil Engg Syllabus

Floors and Roofs : Types, minimum thickness, construction, floor finishes, Flat roofs, RCC jack arch, reinforced brick concrete, solid slab and timber roofs, pitched roofs, false ceiling, roof coverings, Channel unit, cored unit, Waffle unit, Plank and Joist, Brick panel, L-Panel, Ferrocement roofing units, water proofing .Services : Water supply & Drainage, Electrification, Fire protection, thermal insulation, Air Conditioning, Acoustics & Sound insulation, Repairs to damaged & cracked buildings, techniques and materials for low cost housing., Repairs techniques for floors & roofs.

References:

Grading IVth Semester w.e.f.2011-12
1. Mohan Rai & M.P. Jai Singh; Advance in Building Materials & Construction,. 
2. S.C. Rangwala; Engineering Materials 
3. Sushil Kumar; Building Construction, 
4. B.C. Punmia; Building Construction ,. 
5. Building Construction, Metchell 
6. Construction Technology, Chudley R. 
7. Civil Engineering Materials, N. Jackson. 
8. Engineering Materials, Surendra Singh. 

List of Experiments:
1. Tests on Bricks 
2. Tests on Aggregates 
3. Tests on Cement 
4. Determination of workability by compacting factor apparatus. 
5. Determination of workability by Vee Bee consistometer. 
6. Tests on fine aggregate. 
7. Design & drawing of various Building elements. 


RAJIV GANDHI PROUDYOGIKI VISHWAVIDYALAYA, BHOPAL
Credit Based Grading System
Civil Engineering, V-Semester
Elective – I CE- 5005 (1) Water Resources Engineering


Unit - I

Irrigation water requirement and Soil-Water-Crop relationship: Irrigation, definition, necessity, advantages and disadvantages, types and methods. Irrigation development. Soils - types and their occurrence, suitability for irrigation purposes, wilting coefficient and field capacity, optimum water supply, consumptive use and its determination. Irrigation methods surface and subsurface, sprinkler and drip irrigation. Duty of water, factors affecting duty and methods to improve duty, suitability of water for irrigation, crops and crop seasons, principal crops and their water requirement, crop ratio and crop rotation, intensity of irrigation.

Unit - II

Ground Water and Well irrigation:

Confined and unconfined aquifers, aquifer properties, hydraulics of wells under steady flow conditions, infiltration galleries. Ground water recharge-necessity and methods of improving ground water storage. Water logging-causes, effects and its prevention. Salt efflorescence causes and effects. reclamation of water logged and salt affected lands. Types of wells, well construction, yield tests, specific capacity and specific yield, advantages and disadvantages of well irrigation.

Unit-III

Hydrology : Hydrological cycle, precipitation and its measurement, recording and non recording rain gauges, estimating missing rainfall data, rain gauge net works, mean depth of precipitation over a drainage area, mass rainfall curves, intensity-duration curves, depth-area duration curves, Infiltration and infiltration indices, evaporation stream gauging, run off and its estimation, hydrograph analysis, unit hydrograph and its derivation from isolated and complex storms, S-curve hydrograph, synthetic unit hydrograph.

Unit - IV

Canals and Structures: Types of canals, alignment, design of unlined and lined canals, Kennedy’s and Lacey’s silt theories, typical canal sections, canal losses, lining-objectives, materials used, economics.Introductions to Hydraulic Structures viz.Dams,Spillways,Weirs, ,Barrages,Canal Regulation Structures.

Unit-V

Floods: Types of floods and their estimation by different methods, probability and frequency analysis, flood routing through reservoirs and channels, flood control measures, economics of flood control,

Suggested Books :-
1. Irrigation & Water Power Engg. by Punmia & Pandey B.B.Lal 
2. Engg. Hydrology by K. Subhramanya - Tata Mc Graw Hills Publ. Co. 
3. Engg. Hydrology - J.NEMEC - Prentice Hall 
4. Hydrology for Engineers Linsley, Kohler, Paulnus - Tata Mc.Graw Hill. 
5. Hydrology & Flood Control by Santosh Kumar - Khanna Publishers 
6. Engg. Hydrology by H.M. Raghunath 



RAJIV GANDHI PROUDYOGIKI VISHWAVIDYALAYA, BHOPAL
Credit Based Grading System
Civil Engineering, V-Semester
Elective – I CE- 5005 (2) Construction Planning & Management

Unit -I

Preliminary and detailed investigation methods: Methods of construction, form work and centering. Schedule of construction, job layout, principles of construction management, modern management techniques like CPM/PERT with network analysis.

Unit -II

Construction equipments: Factors affecting selection, investment and operating cost, output of various equipments, brief study of equipments required for various jobs such as earth work, dredging, conveyance, concreting, hoisting, pile driving, compaction and grouting.

Unit -III

Contracts: Different types of controls, notice inviting tenders, contract document, departmental method of construction, rate list, security deposit and earnest money, conditions of contract, arbitration, administrative approval, technical sanction.

Unit -IV

Specifications & Public Works Accounts: Importance, types of specifications, specifications for various trades of engineering works. Various forms used in construction works, measurement book, cash book, materials at site account, imprest account, tools and plants, various types of running bills, secured advance, final bill.

Unit-V

Site Organization & Systems Approach to Planning: Accommodation of site staff, contractor’s staff, various organization charts and manuals, personnel in construction, welfare facilities, labour laws and human relations, safety engineering. Problem of equipment management, assignment model, transportation model and waiting line modals with their applications, shovel truck performance with waiting line method.

Reference Books :-

1. Construction Equipment by Peurify 
2. CPM by L.S. Srinath 
3. Construction Management by S. Seetharaman 
4. CPM & PERT by Weist & Levy 
5. Construction, Management & Accounts by Harpal Singh 
6. Tendering & Contracts by T.A. Talpasai 




RAJIV GANDHI PROUDYOGIKI VISHWAVIDYALAYA, BHOPAL
Credit Based Grading System
Civil Engineering, V-Semester
CE-5006Civil Engineering Software Lab


Auto CAD
Laboratory Works/ Exercises

1. Introduction to tools of Auto CAD. 
2. Formation of Layers 
3. Draw Orthographic Drawings 
4. Draw Isometric Drawings 
5. Draw Perspective Drawings. 
6. Scale setting &Plotting. 
7. Drawing Plan of a building in Auto CAD 
8. Drawing Section and Elevation of a building in Auto CAD 
9. Section and Elevation of a building in Auto CAD 
10. Detailing of building components like Doors, Windows, Roof Trusses 
Download 5th Sem civil engg syllabus RGPV CBGS PDF


People also search Structural Analysis -II; Quantity Surveying & Costing; Transportation Engineering; Construction Material & Techniques; Elective-I (Water Resources Engineering; Construction Planning and Management; Environmental Engineering; Advance Fluid Mechanics ); ; Civil Engineering Software LAB; Management Skill Development **(Internal Assessment); Innovative Thinking**(Internal Assessment) Important questions, old papers, PDF, 


Source: www.rgpv.ac.in

0 comments:

Post a Comment

 
Top